OFF CARR Althea, Instruction Manual

Page: 67 / 84

The.wheelchair.could.be. configured .with.double.pushrim.single.drive.
d ouble.pushrim.single.drive.is.composed.of.a.wheel.which,.in.addition.to.the.
normal.pushrim,.has.a.second.smaller.diameter.pushrim..This.second.push-
rim,.through.a.shaft.of.connection,.transmits.the.motion.of.rotation.to.the.op-
posite.wheel.that.have.not.pushrim.
c onnection.shaft.insertion:
•. open.the.wheelchair;
•. make.sure.that.the.rear.wheels.are.properly.insert.into.rear.plate.bush.(see..
par..2.4);
•. seat.the.user.on.the.wheelchair;
•. connect.the.shaft.with.the.rear.wheel.quick.releasing.axle,.paying.particu-
lar.attention.that.the.toothed.terminals.are.properly.connected;
The.position.of.the.anti-tip.is. defined .during.
the.assembly..However.is.possible.to.change.
its.distance.from.ground,.if.necessary.
•. Remove.the.“A”.screw;
•. slide. the. small. wheel. for. narrow. passage.
holding.tube.till.the.desired.height;
•. insert.the.“A”.screw.and. fix .it.properly.
5.3.1 Height adjustment anti-tip device
c. shorten the anti-tip device with the wheel facing down:
•. push.the.lock/quick.release.button;
•. slide. the. telescopic. end. terminal. until. the. pin. snap. in. the. correct. lock.
position.
6. Double pushrim single drive
64 65
ENGLISH