Important notes
Ankle support
The Dynamics ankle support
stabilises
the ankle in a natural way. Its compression
pressure activates the joint’s own support-
ing muscles. Massaging silicone pads help
reduce swelling rapidly.
←
Fitting instructions
The fitting instructions in pictures can be found
on the fold-over page at the beginning of the
brochure.
1
Pull the support over your foot at the stitched end
with the longitudinal seam running along the back
of the foot.
2
The support is sitting correctly if the silicone padding
surrounds the ankle from below.
Dear user,
We are pleased that you have chosen a
product from Ofa Bamberg and would like
to thank you for putting your trust in us.
Please take a moment to read through this
product information carefully to ensure
optimum effectiveness of your Dynamics
product.
Ofa Bamberg wishes you a speedy
recovery!
Please note
– The initial adjustment and strapping on of the
product must be carried out by qualified specialist
staff.
– Wear the product directly on your skin. If it has to
be worn in combination with other products, then
please discuss this in advance with your doctor.
– During long periods of rest (e. g. when sleeping) the
product should be removed.
– If you experience an unpleasant sensation, in-
tense pain or any other problem when wearing the
product, then remove it and contact your doctor or
specialist supplier.
– We use a comprehensive quality management sys-
tem to check our products. However, should there
still be reasons for complaint, please contact your
specialist supplier.
26_DYN_ankle_support_545105028_bro_in_TW_20190115_7279.indd 8
15.01.2019 14:23:56
