![background image](http://html.mh-extra.com/html/ace-innovation/supervisor/supervisor_assembly-and-user-instructions_457408001.webp)
www.aceinnovation.co.uk
08455 199181
SuperVisor®
Assembly & User Instructions
Thank you for purchasing an Ace Innovation SuperVisor®
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING ASSEMBLY
Assembly
Assembly Step 1 – Use the diagram below to help
1.
Attach the supplied G-Clamp to a suitable stable surface and secure it tightly using
the integrated bolt. *WARNING* DO NOT attach the G-Clamp if you feel that it may
cause any damage to the surface you are mounting it on. If the G-Clamp is not
suitable you will need to contact your supplier and order the SuperVisor® weighted
base.
2.
*WARNING* Care should be taken when unpacking the SuperVisor® Arm as it is
spring operated and unbalanced until the Visor element is installed [See Fig 2].
3.
Once the G-Clamp or weighted base is secure, loosen off the lock nut [See Fig 1]
and lower the end of the SuperVisor® Arm into the top hole of the clamp or base.
Once the Arm is fully inserted, tighten the lock nut to secure it.
Fig 1