9
Electric Connection
Connect the unit to a power source which is protected according to table
below.
311 C
316 C
Power supply
230 Volt
400 Volt
Protection
16 A (slow)
3 x 16 A (slow)
Extension cables to have a diameter according to VDE regulations. Extension
cables on reels to be reeled off completely, in order to avoid overheating of the
cable reel. Plugs, couplings to be water-proof. A faulty current protection
switch is recommended. VDE regulations apply.
High Pressure Connection
High pressure hose to be connected to high pressure outlet (11) of the
machine by means of the hand nut without using tools.
Detergent Tank Filling
Fill detergent tank (17) with non-hazardous detergent. When using powders,
these have to be mixed in a separate tank before being filled into the detergent
tank of the machine.
Operation
Important Notes
Both the models are equipped with an automatic START/STOP
device, which stop the machine when closing the spray pistol;
when the spray pistol is released again, the machine is re-started.
The machine always to be switched off by means of the ON/OFF
switch (2) after completion of work, de-pressurise the spray
device.
Machine is equipped with thermal overload protection; if activated,
cool down and re-start machine.
Operation
Open water source.
Unlock and release spray pistol, bleed the unit.
Start the unit by means of the ON/OFF switch (2).
Be aware of recoil / ensure stable foothold.
Carry out cleaning task.
