5
Consumables to be handled thoroughly. Technical safety regulations and
environmental rules to be followed.
Make sure that power cable, plug connections switches are in proper
condition, otherwise the machine must not be started.
Extension cables to have a diameter according to VDE regulations. Extension
cables on reels to be reeled off completely, in order to avoid overheating of the
cable reel. Plugs, couplings to be water-proof. A faulty current protection
switch is recommended.
Electric power can cause severe injuries. Electric components thoroughly and
frequently to be checked for damages and malfunctions, in order to avoid any
cause for accidents. All repair work to be carried out by qualified personnel.
Disconnect the unit from the electrical network during all repair/maintenance
work. (ZH 1/95).
Ensure that the unit cannot move. The unit is equipped with a brake which
must be activated during working in steep areas.
Repair work within the high pressure section of the machine (pump, hoses,
piping) only to be carried out by qualified personnel.
During loading suitable lifting eyes to be foreseen. Balanced load to be
ensured.
After work spray pistol to be locked by means of the safety lever in order to
avoid unauthorised/accidental operation.
Using other materials than original OERTZEN equipment or using
materials which have not expressively been approved by OERTZEN in
writing ceases EC conformity, warranty and product liability.