3
Operating Instructions and Parts Manual
24851
09/14
2014 ©OEM-TOOLS
22 TON
AIR/HYDRAULIC JACK
• Keep the handle dry, clean, and free from brake
fluid, oil, and grease.
• Before use, read and understand all warnings,
safety precautions, and instructions as outlined
in the vehicle manufacturer’s service manual. It
is beyond the scope of this manual to properly
describe the correct procedure and test data for
each vehicle.
• Always perform vehicle service in a properly
ventilated area. Never run an engine without
proper ventilation for its exhaust. Stop work and
take necessary steps to improve ventilation in the
work area if you develop momentary eye, nose,
or throat irritation as this indicates inadequate
ventilation.
• Engine parts that are in motion and unexpected
movement of a vehicle can injure or kill. When
working near moving engine parts, wear snug fit
clothing and keep hands and fingers away from
moving parts. Keep hoses and tools clear of
moving parts. Always stay clear of moving engine
parts. Hoses and tools can be thrown through the
air if not kept clear of moving engine parts.
• The unexpected movement of a vehicle can injure
or kill. When working on vehicles always set the
parking brake or block the wheels.
• Avoid accidental fire and/or explosion. Do not
smoke near engine fuel and battery components.
• The warnings, precautions, and instructions
discussed in this manual cannot cover all possible
conditions and situations that may occur. The
operator must understand that common sense and
caution are factors which cannot be built into this
product, but must be supplied by the operator.
• For safety purposes and the prevention of damage
to expensive components it is advised that the
user have an understanding of basic automotive
repair and a working knowledge of automotive
systems.
• We believe the information contained herein to be
reliable. However, general technical information
is given by us without charge and the user shall
employ such information at their own discretion
and risk. We assume no responsibility for results or
damages incurred from the use of such information
in whole or in part. Always refer to specific
instructions and technical information supplied by
vehicle manufacturer.
• The manufacturer declines any and all
responsibility for damage to vehicles or
components if said damage is the result of
unskillful handling by the operator or of failure
to observe the basic safety rules set forth in the
instruction manual.
• This equipment is intended only for professional
use by personnel trained in performing the service
functions for which it is has been designed.
• This equipment is designed for servicing a variety
of vehicles in a safe, convenient manner. However,
differences in vehicle makes and models may
make it impossible to use this equipment as it is
intended. Do not attempt to force the use of this
equipment on an application for which it is not
designed to perform.
• The procedures documented in this manual are to
serve as guidelines for the use of this equipment.
• In addition to these guidelines, always follow the
manufacturer’s recommended procedures when
servicing each unique vehicle.
• The use of this equipment is simple and
straightforward if you follow the instructions. When
operating this equipment, use common sense, and
always stop to think before using a Hydraulic Truck
Jack or lifting a vehicle.
Capacity
22 Ton
Minimum Height
8-7/8”
Ram Travel
4-3/4”
Screw Adjustment
4-1/8”
Wheel Diameter
8”
Air Pressure
110-125 Psi
Air Hose
3/8” x 48”
Air Inlet Fitting
1/4” NPT
PRODUCT SPECIFICATIONS
