OEM DRAUGHT CAP MOTORIZED 30, Instructions For Use And Warnings

Page: 42 / 66

EC-compliant use and warning instructions
Page 42
CHAPTER 5 –
TRANSPORT AND INSTALLATION
TRANSPORT BY FORKLIFT
Operator qualification
Conductor of lifting means
Necessary DPI
Lifting means
Forklift
Tools to use
Nothing
ATTENZION!
Use only suitable and approved lifting means,
compatible for the size and weight of the machine.
ATTENTION!
Make sure no one is under and within the range of the lifting mean.
To successfully transport by forklift, follow these steps:
S
TEP
ACTION
1
Place the fork of the forklift under the worktop of the machine.
2
Ensure that the fork comes out from the back of the load (at least 5 cm), for a sufficient length to
eliminate any risk of overturning the transported part.
3
Lift the forks until the contact with the load
Note: If necessary, attach the load to the fork with clamps or similar devices.
4
Slowly lift the load by a few tens of centimeters and check its stability by making sure that the load
center of gravity is positioned in the center of the lift fork.
5
Tilt the forks backwards (towards the driver's seat) to ensure greater load stability during transport.
6
Adjust transport speed based on pavement and load type, avoiding abrupt manoeuvres.