OEM DRAUGHT CAP MOTORIZED 30, Instructions For Use And Warnings

Page: 2 / 66

EC-compliant use and warning instructions
Page
2
CHAPTER 0 – INDEX
PREFACE
All rights reserved. No part of this publication can be reproduced, distributed, translated into other languages or
transmitted by any electronic or mechanical means, including photocopy, recording or any other storage and retrieval
system, for other purposes other than the only personal use of the buyer, without express written permission of the
Manufacturer.
The Manufacturer is in no way responsible for the consequences of any mishandled operations carried out by the
user.
EDITOR'S NOTE
This documentation is specifically intended for technicians; therefore, some information that is easily deductible from
reading texts and examining drawings may not have been further specified.
The Publisher is not, in any way, responsible for the information and data in this manual: all the information contained
therein has been provided, checked and approved during verification by the Manufacturer.
The Publisher is in no way responsible for the consequences of any mishandled operations carried out by the user.
GENERAL
All operational and maintenance instructions and recommendations described in this guide must be complied with.
For best results, the Manufacturer recommends to perform regularly all the cleaning and maintenance operations to
keep the plant in the best condition.
It’s very important to train the personne l responsible for the machine, both in terms of its use, as well as for the
maintenance and control of compliance with operating procedures and all the safety standards in this manual.
Edition: 06/2020
Version: 1.0
COPYRIGHT
© 2020 OEM ALI GROUP S.r.l. a socio unico