OEG KSW-E, Manual

Page: 38 / 204

ENG
38
Service settings manual
Table with description of parameters :
Parameter
Function Description Setting range Default
value
F2.1
Dependence R1 from
other relays
You define how R1 operation depends on other relays.
& - means that the selected relay has to be switched on
for R1 to be able to switch- on
&! - means that the selected relay has to be switched
off for R1 to be able to switch- on
I - means that R1 will switch- on always when selected
relay is switched on
I! - means that R1 will always switch- on when the
selected relay is switched off
For the selected relay with RPM regulation, it is consi-
dered as it is switched on when working inside the set
limit of revolutions.
IMPORTANT!
For all operation conditions set by F2 parameters it is
valid that they all have to be fulfilled at the same time in
order R1 to be switched- on.
0 - none
1 - & R2
2 - I R2
3 - &! R2
4 - I! R2
5 - & R3
6 - I R3
7 - &! R3
8 - I! R3
0
F2.2
Time program for R1
Selection of required time program for operation R1. 0 - without
1 - prog. timer 1
1 - prog, timer 2
1 - prog. timer 3
4 - selected timer
0
F2.3
Thermostatic operation
of R1
Selection if R1 operates as a thermostat.
0 - no
1 - yes
0
F2.4
Sensor for thermostatic
operation
Selection of sensor for thermostatic operation.
1 - T1
2 - T2
3 - T3
4 - T4
5 - T5
4
F2.5
Thermostat hysteresis
Hysteresis for thermostatic operation. 1 ÷ 30 K
4
F2.6
Differential thermostat
Selection if R1 works as a differential thermostat.
0 - no
1 - yes
0
F2.7
Heat source sensor for
diff. thermostat
Selection of heat source sensor (higher temperature)
for differential operation.
1 - T1
2 - T2
3 - T3
4 - T4
5 - T5
3
F2.8
Heat sink sensor for
diff. thermostat
Selection of heat sink sensor (lower temperature) for
differential operation.
1 - T1
2 - T2
3 - T3
4 - T4
5 - T5
4
F2.9
Switch-on difference
Switch-on difference setting for differential thermostat. 4 ÷ 30 K
8
F2.10
Switch-off difference
Switch-off difference setting for differential thermostat. 1 ÷ 20 K
3
F2.11
Switch-off delay
Time set for switch-off delay. 0 ÷ 300 s
0
F2.12
Switch-on delay
Time set for switch-on delay. 0 ÷ 300 s
0