Settings
Operation
6
Settings
Changing the settings
Opening the hinged control panel
cover causes the operation-control
module to switch automatically to In-
formation and Programming mode.
The operating controls are assigned a
new significance (which can be seen
from the printed designations which will
now appear beneath the keys).
All entries can be made on the basis
of the same principle
1. Open the hinged cover on the front
of the controller; the controller
switches to INFO mode. The three
keys are then assigned the function
printed on the inside of the hinged
cover.
2. Choose the required parameter of
the current level or another level
with keys +/-.
3. Press the Programming key
.
4. If you press key
and have se-
lected a lower operating level
-> continue at Point 2!
5. If you press key
and have se-
lected a setting, the controller
changes to Programming mode
(Programming indicator
).
6. The parameter value can be
changed with keys
or
.
7. Press key
again; this saves the
new value.
8. If you close the hinged cover before
pressing key
, this quits Pro-
gramming mode. The controller
switches to the standard display
(boiler temperature and time). The
changed value is not saved.
!
You can branch up to the next oper-
ating level by pressing key
and
selecting the "RETURN" function.
A Designation of the entry or of
the operating level.
B Entry
C Programming indicator
(Warning triangle
)
D Programming key
E
key: Next setting /
increment setting
F
key: Previous setting /
decrement setting
G RESET switch
H Desired room temperature
correction
A
B C
E
G
H
F
D