Operation
Operating controls
3
Oper ation
Oper ating contr ols
a
Display
b
Hinged control panel cover
A
Mode-selector switch
B
ECO switch
(interrupting the heating time)
C
Party switch
(prolonging the heating time)
D
Rotary knob for desired value
entry
Commissioning
!
Please do not forget: Remove the
protective film from the battery
contacts (see Chapter Battery
change).
After correct installation, it is first nec-
essary to enter the language, the time
and the day of the week in order to op-
erate the controller:
1. Open the hinged front panel (b).
2. Press key
.
3. Select the language with keys
/
.
4. Press key
twice.
5. Set the time with keys
/
.
6. Press key
.
7. Set the day of the week (1-7) with
keys
/
.
8. Press key
.
9. Close the hinged front panel (b).
The controller is now ready for opera-
tion!
Correcting the desired room
temperature
The rotary knob can be used to adjust
the programmed desired room tem-
peratures by
±
5°C. The set reduced
temperature is not influenced. The cor-
rected desired value is displayed as
DES ROOMTEMP at level "Parameter"
(is updated every 10 s).
A
B
C
D
b
a
1
2
3
4
5
6
7
1