3
.0
Delivery package
• Moisture analyser
• 4 x batteries R03/AAA; 1.5 V
• Operating Instructions
6
.0
Intended use
The device is designed for measuring the residual moisture of wood-based materials and buil-
ding materials, such as sawn timber, masonry, concrete or screed. To do this, the two measu-
ring tips are held or pressed against the material. The measured value appears on the display.
The device must not be modified.
Observe the safety instructions and read them carefully before use. Keep the operating in-
structions in a safe place and pass them on with the device.
Any use other than that described above is not in accordance with the intended purpose and
may result in damage to property or personal injury.
OEG moisture analyser
GB
12
4
.0
Parts
1 Measuring
tips
2 Display
3
Power button (ON / SET)
4 Button for LED light
5 LED
light
6 Protective
cap
7
Contacts for device test
8
Battery compartment and belt clip (rear panel)
5
.0
Technical data
1
2
3
4
5
6
7
8
Measuring ranges
6 to 44% for wood-based materials, for building materials,
see "Materials table". 0 to 40°C for temperature (or 32°F to 104°F)
Resolution
1% for wood-based materials, 0.05% of the display value for building
materials, 1°C or 2°F for the temperature
Accuracy
Wood-based materials:
±2% in the range up to 29%,
±4% in the range from 30% onwards
Building material:
0.1 of the indicated value
0.2 of display value from 1.4
Power supply
4 batteries 1.5V R03/AAA
Operating range
Temperature: 0 to 40°C
(environment)
Humidity < 85%
Storage conditions
Temperature: -10 to 50 °C
Humidity < 85 %
Illumination
1 LED, white, free group (risk group 0) according to EN 62471
