Odys MultiFlat 20, Manual

Page: 60 / 139

ODYS MultiFlat 20” DVD
13
EN
Preparation of Remote Control
Place the remote control on an even surface
and insert the supplied batteries into the remote
control as follows.
1. Softly push the back cover to open the
battery compartment.
2. Insert two batteries (1.5V, size AAA),
please make sure the polarity matches the
marks inside the compartment.
3. Softly press the back cover to close it.
Under normal use the battery will last
for six months.
Take out battery when the remote is
not in use for a long time.
Using of Remote control
Point the remote control unit from no more than
about 7m from the remote control sensor and
within about 60 degrees of the front of the unit.
The operating distance may vary depending to
the brightness around.
Do not point bright lights directly at the
remote control sensor.
Do not place objects between the
remote control unit and the remote
control sensor.
o not use this remote control unit while
simultaneously operating the remote
control unit of any other equipment.