Tips
A
x5
E
x1
I
x3
M
x5
N
x5
O
x1
J
x5
K
x11
L
x5
F
x1
G
x2
H
x1
B
x1
C
x1
D
x1
1. Please make sure that all bolts and screws have been tightened properly
before actually using the chair. Check all levers, adjust knobs and buttons
before everyday use.
P.S: If the cylinder doesn't match the seat plate appropriately, the height
adjuster may stop functioning.
2. Please inspect the chair twice a year. Daily use can wear down the screws
and bolts, so regular inspections are important in order to keep you safe.
3. No standing on the chair.
4. Please do not press the height adjuster down while adjusting, you only
have to
lift it slightly to raise or lower the seat. Hard pushing might break the adjuster.
5.
If you are giving this chair to a third person/party, please attach this manual
with the chair.
6. Installation tips: follow the instructions carefully. Please do not tighten
the screws until all screws are lined up at once. This helps you make changes
easier if some steps go wrong. Over-tightening one screw can make other
screws hard to tighten.
7. Please tighten all screws again after the set-up process is complete.
Casters
Headrest
Seat
Bolts
M6*40mm
Bolts
M8*40mm
Lock Washers
Allen Wrench
M6*16mm
Bolts
M6*50mm
Lock Washers
M6*16mm
Bolts
M6*75mm
Armrests
Seat Plate
Base
Cylinder
Backrest
* Each type of bolt and washer has one extra as a spare.
03
02
Tools List
