Operating Section
3.3 Dumping the Body
Review the Engine Operating Manual supplied with your
leaf vacuum for specific start-up, maintenance and op-
erating instructions. It is especially important to review
break-in service procedures for brand new units.
ODB COMPANY
Thoroughly read and understand the safety and
pre-operating sections of this manual before star-
ing the engine.
figure 3.3a
Perform all the pre-starting, pre-operating checks
outlined in the EOM and in this manual.
Start the engine as previously discussed in this
manual and in the EOM. Make sure the PTO is
disengaged.
Do a thorough inspection of the entire area
around and above the unit, looking for any object
that could get in the way of the body dumping.
Make sure the surface is level and the ground is
solid before dumping.
Open the rear doors and secure to the side of the
box container.
Dumping the body (refer to figures 3.3a and 3.3b):
1.
2.
3.
4.
5.
800-446-9823
Make sure the unit is properly attached to the tow
vehicle and the surface is level and solid before
raising the body .
figure 3.3bc
Watch for any overhead obstacles such as power
lines and tree limbs before dumping.
Make sure all people and animals
are completely clear of the unit dur-
ing the dumping process.
Always operate the dump body
controls from the front of the unit,
standing beside the tongue.
����� ���� ������� �����
�������� ����� �������
Summary of Contents for SCL800SM-3X
Page 113: ......
