OCULUS 68100 Instruction Manual Download Page 24

Page: 24 / 98

8 Set up and Connection

18 / 92

Instruction Manual Myopia Master® (G/68100/EN Rev04 0820)



If you use a multiple socket outlet to connect the Myopia Master®:
Use a multiple socket outlet that complies with the requirements of
IEC 60601-1.



Do not place the multiple socket outlet on the floor.



Do not use more than one multiple socket outlet.



Plug only the Myopia Master® and the computer that is being used
with the unit (if applicable) into the multiple socket outlet.



Connect the device to the power supply using the power cable
provided, see

sec. 24.1, page 82

Note

Risk of equipment damage due to incorrect connection

If you do not connect the Myopia Master® properly, and the connection
is live, the unit can be damaged within a short period of time.



Do not use excessive force when connecting the electrical plug.



Pay attention to the specifications on the nameplate.

If the electrical plug is damaged, contact our service department or an
authorized dealer to repair the damage.

Fig. 8-1: Connection

Summary of Contents for 68100



































































































Search results

Summary of Contents for 68100

Reviews:

Related manuals for 68100

Brands by name

Popular brands

OCULUS 68100, Instruction Manual

Search results

Summary of Contents for 68100

Reviews:

Related manuals for 68100

Brands by name

Popular brands