manualshive.com logo in svg

OCULUS 68100, Instruction Manual

Share
Download
OCULUS 68100 Instruction Manual Download Page 13

4  Safety In

s

truction

s

Instruction Manual Myopia Master® (G/68100/EN Rev04 0820)

7 / 92

In the patient environment, use devices that conform to IEC 60601-1. If 
a multiple socket outlet is to be used, or if a device is to be used that does 
not meet the IEC 60601-1 standard, use an isolating transformer.

Information about the operation of an ME system

The Myopia Master® and a connected computer form a medical 
electrical system (ME system) according to IEC 60601-1. If you connect 
additional devices, such as, for example a printer, those devices become 
part of the ME system. 

Make sure that all devices of the ME system meet the requirements 
of IEC 60601-1, IEC 60950-1 or 62368-1.

Note that an output voltage of maximum 5.5 V DC is supplied by a
device connected via USB. 

Instructions for Operation

Never operate a damaged Myopia Master®.

Only operate the Myopia Master® with the original accessories 
supplied by us and only when the unit is in technically perfect 
condition. 

Before first use: Let OCULUS or an authorized dealer train you in the 
operation of the Myopia Master®.

Only operate the device if you have understood the operating 
instructions.

Fig. 4-1: Patient environment

Summary of Contents for 68100



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands