manualshive.com logo in svg

OCULUS 68100, Instruction Manual

Share
Download
OCULUS 68100 Instruction Manual Download Page 25

8  Set up and Connection

Instruction Manual Myopia Master® (G/68100/EN Rev04 0820)

19 / 92

8.2

Integrate into IT Network for Service Purpo

s

e

s

An authorized person is allowed to connect the Myopia Master® to a 
computer via a USB connection for maintenance and service purposes. For 
example to update firmware or calibrate the device. You need an USB port 
for the connection.

It is possible to connect the Myopia Master® to a computer which is 
integrated in an IT network. Do not use wireless technology.

Each connection of the Myopia Master® to a computer creates an IT 
network or an existing network will be changed. The changes could 
introduce new risks for patients and operators. Changes to the IT network 
include:

changes in IT network configuration

connection of additional items to the IT network

disconnecting items from the IT network

update of equipment connected to the IT network

upgrade of equipment connected to the IT network 

If your computer is already integrated into an IT network, the following 
information will apply.

Caution

Risk of incorrect measurements/equipment damage due to unauthorized
personal

Ensure that only an expert, authorized by OCULUS 

connects the computer.

updates the firmware.

Risk of incorrect measurements/equipment damage due to incorrect 
connection

Each connection of a Myopia Master® with a computer could introduce 
risks for patients and operators, which are not described in this manual.

Ensure the safety of the patient and the operator and ensure the 
functionality of the Myopia Master® and the connected computer.

Connect the device to your computer/laptop using the USB port,
with a USB cable with an USB FS MED-Isolator for maintenance and
service purposes only.

Summary of Contents for 68100



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands