Octopus F IP-Netpackage Operating Instructions Manual Download

Page: 26 / 103

Step by Step

Basic functions

Redialing a number

The last three external telephone numbers dialed are stored automat-

ically.

You can redial them simply by pressing a key.

Displaying and dialing saved station numbers

Press the key once to dial the number last dialed.
Press the key twice to dial the next to the last number dialed.
Press the key three times to dial the third-to-the-last number dialed.

Keep confirming until the phone number you want appears.

Select and confirm the option shown.
Pay attention to the notes on voice encryption

Page 59.

Ending a call

Replace the handset.

Press the key shown.

If this feature is configured (contact your service personnel),

account codes entered are also saved

Page 57.

Next?

Call?

Summary of Contents for F IP-Netpackage








































































































Search results

Summary of Contents for F IP-Netpackage

Reviews:

Related manuals for F IP-Netpackage

Brands by name

Popular brands

Octopus F IP-Netpackage, Operating Instructions Manual

Search results

Summary of Contents for F IP-Netpackage

Reviews:

Related manuals for F IP-Netpackage

Brands by name

Popular brands