Chapter 3 Setup and Installation
Hippo DCA2 User’s Manual
20
To insert the modules into the banks follow these steps:
1. Locate the notch on the corner of the module.
2. Hold the module so that the notch is at the bottom left corner.
3. Insert the bottom edge of the module into the bank at an angle, then push the
module forward so that it is locked into place by the latches located on the sides of
the bank. The latches should be locked tightly and the holes in the module should
be aligned with the tabs on the bank.
Figure 10
Proper Memory Module Installation
3.7
Compatible 72-pin SIMM TYPES
Slot s
Memory Size
Speed
DynamiCache Slot 1
4M, 8M, 16M
15ns
DynamiCache Slot 2
4M, 8M, 16M
15ns
DRAM Slot 1
4M, 8M, 16M, 32M
60ns / 70ns
DRAM Slot 2
4M, 8M, 16M, 32M
60ns / 70ns
