background image

9

m o v i n g   t h e   P r o d u c t

It is safest to move the product to its installation location in its shipping carton. It may be easier to move the 
product  into  your  home  after  you  remove  it  from  the  packaging,  but  be  careful  not  to  hit  any  walls  or  doors.  
The Q35 features transport wheels on the front of the unit. Be careful when moving from one surface to another, 
such as hardwood floor to carpet.

Note:

  If you need to pick up your elliptical there are hand placement slots under the front shroud. Please take 

caution when lifting. The elliptical weighs approximately 260 lbs. when fully assembled.

Tip:

  When using the front transport wheels, it is easier to pull the unit rather than push it.

 

9. Plug in product

a.  First, insert the plug into the product, located just below 

the right roller track. Next, route the cable toward the wall 
outlet. You can run it under the product to avoid seeing it 
or tripping on the cable. Ensure that the cord will not be 

pinched and become damaged. Plug the product into the 

wall. 

Note:  There is no need to turn off your product

—your 

Q35 was designed with an intelligent sleep mode—
a virtual off button. This eliminates the need for an 
on/off switch. When your product is in sleep mode, 
it uses very little power. 

Summary of Contents for Q35













Reviews: