7
4. Place top cover
a Place top cover (C) on top of main housing.
Make sure the
steel bracket on the front of the top cover clips on to
the front of the main frame.
b. Secure the top cover to the frame using 2 Phillips screws (L).
5. mount the console to the console mast
Note: If your product was shipped with the console attached,
proceed to step 6.
a. Attach the cable connectors from the console mast tube to
the connections on the back of the console.
Listen for clicks
to ensure positive connections.
Make sure any excess
cable is pushed into upright tube.
b. Position the console on the plate at the top of the mast (B),
and insert 4 Phillips screws partially through the mast plate
into the console back. Tighten screws to secure.
6. install mast boot
a. Place the rubber mast boot (I) around the mast (B).
b. Starting at the front of the machine, tuck the edges of the boot
under the lip of the top cover (C).
