Cardio
BC1000
CHAPTER 6: ADDITIONAL INFORMATION
Octane Fitness • St. Louis, MO • Phone: 888-628-2634/763-757-2662 • OctaneFitness.com
Page # 35 of 41
Code
Type
Description
CLUB UNIT
Club Setting
Unit of Measurement
. Press Enter and then Time (+) or Time (-) to scroll
between miles and kilometers. Press Enter to save selection.
CLUB BELL
Club Setting
Bell Volume
. Sets the decibel level of the bell that provides signals during
workouts. The options are Off, 1 (softest), 2 or 3 (loudest), and the default
value is 3. Press Enter, then Time ( +) or Time ( – ) keys to scroll through
the options. Press Pause Clear once to save your selection and step back to
scrolling mode.
CLUB Brit
Club Setting
Brightness
. Sets the brightness of the display. The default value is 100.
Press Enter, then use the Time ( +) or Time ( – ) keys to increase or
decrease the brightness, in 5% increments. Press Pause Clear once to save
your selection and step back to scrolling mode.
USAG U1 R
Usage
Revolutions
. Displays the total number of revolutions for the unit. The
data is displayed in thousands, shown vertically in two groups of three
at the lower left of the screen. The display dynamically changes if you are
pedaling vs. rowing. If desired, press and hold Quick Start and Pause Clear
simultaneously for three seconds to reset the counter to zero. Press Pause
Clear twice to step back to scrolling mode.
USAG U2 St
Usage
Total hours
. Displays the total number of hours and minutes of operation
for the unit. The data is shown vertically in two groups at the lower left of
the screen; hours on top, minutes underneath. If desired, press and hold
Quick Start and Pause Clear simultaneously for three seconds to reset the
counter to zero. Press Pause Clear twice to step back to scrolling mode.
