Octagon SF 1008 HD, User Manual

Page: 82 / 88

42
restore the stored values including service data and system parameters. Press the OK button to restore
all data.
 Store system data : If you want to use system parameters and service data in the future, this menu
allows you to store current state. Press the OK button to store current state.
3.6 System Information
This menu displays general information about the hardware and software version of your receiver.
4. Utilities
4.1 Calculator
To use the calculator, highlight the calculator and press the OK
button.
4.2 Calendar
To display the calendar, highlight the calendar and press the
OK button. Utilize the ARROW buttons to choose the date. If
you press PAGE UP/DOWN button, you can see the past/next
month of the calendar.
4.3 CAS (Conditional Access System)
 Smart Card Slot
-
Conax smart card menu
To watch scrambled services, you need to have an
appropriate Conax smart card from the service providers.
Insert a valid smart card into smart card slot (only the
bottom slot of the two is active). The message of ‘Smart card
Initializing…’ will appear on the screen. After the message
disappears, you can watch the service you want.
- Smart card information
You can view the current status of smart card. Select the slot
which you want to view using the ARROW buttons. And
press the OK button.

CAM Initializing
To watch scrambled services, you need to have a Common
Interface Conditional Access Module(CAM) and an appropriate
smart card from the provider. Insert the CAM together with a
valid smart card into CI slot (two slots available). The message
of ‘
CI Initializing…
’ will appear on the screen. After the
message disappears, you can watch the service you want.
 CAM information
You can view the current status of CAM. Select the slot which you want to view using the ARROW
buttons, and press the OK button. If the CAM is available, you can view information about each slot.
NOTE : The displayed information of each CAMs may be different depending on the CAM used.