12
Operation
Installing The Head
The 120EX head may be installed on a standard tripod with a Mitchell base
mount using the tiedown knob assembly provided.
After securely mounting the head on the tripod, use the bubble level to set it
level. If necessary, press the display actuator to illuminate the bubble level.
Handles
Install the handles on the rosette handle mounts and adjust the position before
tightening the clamps. Adjust the length of the telescoping handle as desired.
Eyepiece Leveler
If required, install the optional undermount eyepiece leveler (EPL) assembly on
the left hand side below the counterbalance crank. The eyepiece leveler is
compatible with Arri's eyepiece rods.
Alternatively, the rear mount eyepiece leveler is attached to the left rear
shoulder screws.
Operator's Guide - OConnor 120EX Pan and Tilt Head
www.ocon.com
OConnor Engineering
