oConnor 1030D Operator'S Manual Download Page 7

Page: 7 / 22

1030D/1030Ds Fluid Head

Technical specification

Dimensions

Height (incl. camera platform) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6 in. (16.8 cm)

Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.6 in. (19.3 cm)

Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 in. (11.7 cm)

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.7 lbs (3.9 kg)

Payloads and ranges

Note: Payload capacity and tilt ranges are based on a C of G height of 6" (15 cm).

1030D

Capacity (see counterbalance graph, Figure 3)

Minimum payload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 lbs (no load)

Maximum payload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 lbs (13.9 kg)

Tilt range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±90°

Pan range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360°

Counterbalance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . continuous

1030Ds

Capacity (see counterbalance graph, Figure 4)

Minimum payload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 lbs (no load)

Maximum payload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 lbs (18.6 kg)

Tilt range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±60°

Pan range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360°

Counterbalance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . continuous

Mounting

Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mm ball base (standard)

150 mm ball base, Mitchell base (optional)

Camera mounting platform . . . . . . . . . . . . . . . . . . . . . . . . . . . mini Euro or large Euro (optional)

Summary of Contents for 1030D























Search results

Summary of Contents for 1030D

Reviews:

Related manuals for 1030D

Brands by name

Popular brands

oConnor 1030D, Operator'S Manual

Search results

Summary of Contents for 1030D

Reviews:

Related manuals for 1030D

Brands by name

Popular brands