background image

1030D/1030Ds Fluid Head

3

Preface

Congratulations on the purchase of your new 1030D/1030Ds fluid head from OConnor!

We want you to get the most from your new 1030, and therefore encourage you to read this 
operator’s guide to familiarize yourself with its many features, some of which may be new to you. 
It also covers essential health and safety information and a section on maintenance that will 
ensure your new product is kept in perfect condition.

Please register your purchase online at www.ocon.com.

Features and benefits of your new 1030 

The 1030D/Ds is the smallest in OConnor’s Ultimate range of fluid heads and 
features OConnor’s stepless counterbalance system as well as ultra-smooth 
pan and tilt fluid drag designed for cine-style shooting.

A new collapsible counterbalance crank handle makes balancing the payload 
easier. The new 1030 has all controls on the camera operator’s side of the 
head (on the left or ‘smart’ side) and features platform scales and two rosette 
handle mountings on either side of the head.

OConnor’s patented fluid drag system allows extremely quick pan movements 
from one position to another, recovering instantly without any springback.

You can set up easily in low light conditions using the illuminated bubble level.

Summary of Contents for 1030D























Reviews: