ADJUSTMENTS AND
MAINTENANCE
UT-MT-0938_1.0_30-03-2023 (EN)
Use and Maintenance Manual
DIAM3200
34
4.6
Troubleshooting
Before proceeding to delete the message, identify the cause of the fault and eliminate the
problem.
Check the general status of the device. If necessary, consult the manual to identify the problem and the possible
causes of failure.
Eliminate the problem and press the RESET button (P1) to restore the system.
A system reset is only possible with the system energised in STOP mode.
The unit preserves the memory of messages detected during operation even in the event of
the supply voltage. When switching the unit back on, proceed to resolution and restoration
of all messages in the memory.
