Oceasoft OCEABridge User Manual Download

Page: 7 / 45

Introduction

OCEABridge User Guide

Page 7

User guide

Introduction

Congratulations and thank you for choosing the OCEABridge™ wireless gateway solution.

This guide provides a general description of the OCEABridge solution as well as practical

instructions for installation and easy setup of your device.

OCEABridge is designed to interact with the following OCEASOFT products and applications:

•

Emerald™

modules: Bluetooth-enabled data loggers for monitoring temperature

during shipping.

•

Atlas™

modules: limited duration Bluetooth™- enabled data logger for monitoring

the cold chain on-the-go.

•

OCEAView

: Web application dedicated to OCEASOFT’s Bluetooth™-enabled Atlas

™

Emerald

™

, and Phoenix™ solutions.

For more information about these products (sold separately), please read the specific

instructions provided with each one.

1.1

OCEABridge™ solution overview

Main features

•

Ethernet wired or WiFi wireless connectivity

•

Optional 3G/4G cellular data connectivity

•

Automatic detection of compatible OCEASOFT data loggers within Bluetooth®

coverage zone

•

Data collected and sent automatically to OCEACloud Cloud platform

•

Integrated web interface for easy OCEABridge gateway configuration

•

Unlimited storage for sensor readings on OCEACloud

Summary of Contents for OCEABridge














































Search results

Summary of Contents for OCEABridge

Reviews:

Related manuals for OCEABridge

Brands by name

Popular brands

Oceasoft OCEABridge, User Manual

Search results

Summary of Contents for OCEABridge

Reviews:

Related manuals for OCEABridge

Brands by name

Popular brands