Managing network interfaces
OCEABridge User Guide
Page 29
User guide
4.1
WAN and WLAN interface
Configuration parameters are divided into two groups (
General setup
and
Advanced
Settings
) and are common for both WAN and WLAN network interfaces.
You may adjust the various interface settings according to your network.
General Setup
Figure 26 – General settings for the interface
Status
:
Displays statistics for the interface, such as up-time, MAC
address, data sent and received by the device, and its IPv4
address.
Protocol
:
By default,
DHCP client
is selected. Your OCEABridge
gateway will obtain its IP address automatically from your
network router. Enter the name to use for this device in the
Hostname to send when requesting DHCP
field. This name
is seen by the remote DHCP server.
If you choose to use a
Fixed address
,
confirm the address protocol change by clicking on
Protocol
on switch
, then enter the OCEABridge IP address and
subnet mask in the fields displayed on the screen.
Click on
Save and apply
to record your changes.
