background image

 

1.1 General information 

1.1.1 Announcement 

Shenzhen Oceanpower Technology Co., Ltd claims earnestly that this product is 
manufactured on the basis of the corporation standard (registered number is 
QB/440304L1193-2002) by shenzhen technology supervision station. This standard is 
according to the industrial requirement (SB/T10235-1994) in china, the food sanitation 
and safety related standards. The design of this machine and its technology is protected 
by patent. In addition 

 we also seriously follows the directives of CB and CQC for the 

manufacturing of this machine. 
 

1.1.2 Information to the user 

• 

For any explanation and information regarding the machine, its spare-parts or how 
to operate it, the manufacturer of the machine will be available if any questions 
should arise. 

• 

If any problem should occur, please contact our local distributor or the 
manufacturer if no distributor is available.  

1.2 Information about the machine 

1.2.1 General data 

OPF serial soft ice cream machine is manufactured and developed by Shenzhen 
Oceanpower Technology Co., Ltd. It can be used for production and distribution of one 
or two flavored soft ice cream.  
It applies the technology from several patents that our company has gained, such as our 
unique evaporation cooling technique and the digital control system of the machine. The 
machine is fitted with an electronic temperature and consistency control system and the 
hardness level of the ice cream can directly be chosen from the control board. The 
operative condition of the motor can also be seen in a real-time display for a clear 
indication that the machine is working properly.  
 
Oceanpower recommends that high quality ice cream mixes should always be used, like 
Oceanpower ice cream powder mixes. It is also possible to use other brands, but if so, 
please make sure that the mixes been made by high quality raw materials or ingredients 
from reliable or trustworthy suppliers. 
 
Note. Make sure that the milk fat content of a different ice cream mixes than 
Oceanpower ice cream mix is about 5 %. 
 
Beside what is mentioned above it is of important to consider: 

• 

Always follow the instruction given by the supplier. 

 

6

Summary of Contents for OPF138






























Reviews: