SPORTS SERIES
Single / Dual / Colours / DMX
.
INSTALL & OPERATION MANUAL
29
6.6 INSTALLATION OF 2-WAY DMX JUNCTION BOX
1. Remove the lid of the Junction Box.
2. Loosen the M20 cable gland cap
①
and feed the main power wires through the power input cable gland.
The appropriate gauge of the supply cable will depend on the current draw of the connected lights and the
length of the cable run from the fuse/breaker panel to the junction box. For the latest specifications of the
lights being used, please refer to the spec sheet available at www.oceanled.com.
3. Insert the bare ends of the wires into the screw terminal
②
, ensuring correct polarity (usually red for positive
and black for negative). Tighten the screw terminals using a screwdriver and secure the M20 cable gland
(hand tight only).
Name
Function
Connection
PWR In
+
DC Power +VE
Connect to a fuse +12/+24 VDC from fused panel
/ battery
-
DC Power -VE
Connect to battery GND return
4. Loosen the
“Light 1”
M16 cable gland cap
③
and feed the first light cable through the gland and into the
screw terminal
④
in the correct order. Use a flat-head screwdriver to tighten the screws on the screw
terminal and secure the cable gland.
①
②
③
④
⑥
⑦
⑧
⑤
⑨
⑩
⑪
⑫
