SPORTS SERIES
Single / Dual / Colours / DMX
.
INSTALL & OPERATION MANUAL
20
4.6 MAINTENANCE
Marine growth can accumulate rapidly on the light, leading to a decrease in performance within a few weeks. To prevent
this, all OceanLED lights are coated with a specialized Tritonium® coating, which creates a non-stick layer on the glass
lens surface. It is recommended to clean the lights bi-weekly using a boat brush or a similar tool to keep the lens clean.
The extent of marine growth can vary significantly around the world, making regular maintenance crucial for optimal
performance and longevity of the product. If heavy fouling occurs, barnacles can be removed from the lens by using a
plastic scraper with moderate pressure underwater. When cleaning the lens while the boat is out of the water, wet the
lens before scraping. Never attempt to scrape or remove barnacles from a dry lens.
Never use a high-pressure jet wash to clean the lens/bezel, as this can damage the seals and void the
warranty.
Harsh cleaning solvents will damage the light seals and Tritonium coating.
4.7 REPLACEMENT PARTS
The light source of this luminaire is not replaceable; when the light source reached its end of the life the whole
luminaire shall be replaced.
If the external flexible cable from the back of the light is damaged, contact your local OceanLED representative to
arrange for replacement.
Lost, broken, and worn parts can be replaced on request and can be obtained through your local OceanLED
representative.
