SPORTS SERIES
DOCKLIGHT
.
INSTALL & OPERATION MANUAL
2
Preface
READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL
CAUTION
(Risk Group 2): Possibly hazardous optical radiation emitted from this product. Do not stare at operating
lamp. May be harmful to the eye.
CLASS 3
This equipment is designed to operate at voltages of less than 50v DC.
WARNINGS
Before installing your OceanLED Light, read and follow all warning notices and instructions which are
included. Failure to follow safety warnings and instructions can result in property damage, severe injury or
even death.
Before installing your OceanLED Light, check local laws for restrictions regarding the use of colored lights
in your area.
It is advised not to operate lights out of water for a period longer than 5 minutes. Exceeding this may cause
damage to the light unit
Salt is an inherently corrosive material. Metal parts and certain natural and man-made surfaces are
particularly susceptible to corrosion and deterioration when used in and around salt water. Some OceanLED
lights contain combinations of plastic and polymer products which are impervious to salt water corrosion,
however, screws and fasteners used for the installation must be of a marine grade type stainless steel or
equivalent and monitored annually to ensure the lights remain in service for years to come.
Never Use Solvents! Cleaners, fuel, and other products that may contain strong solvents, such as acetone,
that attack many plastics greatly reducing their strength and irreversibly damaging the special lens coatings
and cable sheathings.
Never connect/disconnect lights with power applied as irreversible damage may occur. Ensure polarity of
power connections is correct. Failure to do this may invalidate the warranty.
Never clean lights using a high-pressure jet wash
– this will invalidate warranty. Please avoid coating the
front of the light/lens without consulting OceanLED. Failure to do so will invalidate your warranty.
Do not submerse your cable ends in water; cable and connections exposed to under- water submersion will
not be covered by warranty. Mounting the light in any other configuration, other than those described in this
guide, will invalidate its warranty.
