Oceanic VT 3, Operating Manual

Page: 99 / 164

99
The VT3 will also enter an Immediate Violation Mode (Violation
Gauge Mode)
5 minutes after surfacing from a dive in which a
Delayed Violation occurred.
Violation Gauge Mode on the Surface does not allow
access to the SET F, PLAN, FLY, and SAT features/screens.
The countdown timer that appears when you try to access Time
to Fly does not represent Time to Fly. It is only provided to
inform you of the time remaining before normal operation can
resume with full VT3 features and functions.
This condition is a Permanent Violation, and in the event that a
dive is made during the 24 hour period, a full 24 hour surface
interval must then be served before all functions are restored.
VIOLATION GAUGE SURF MAIN Display (Default),
information provided includes (Fig. 84) -
> Full TLBG and O2BG, both flashing signifying Violation
> Message VIOL alternating with SEA (and WET if wet)
> Tank Pressure with the PSI (or BAR) icon, if a TMT is active
and linked
> Symbol DIVE and number of that dive
> Symbols TIME and SURF with Surface Interval Time (hr:min)
> Tank icon representing GAS1 (surface default)
> Symbol NITROX (if set for Nitrox)
Fig. 84 - VIOLATION
GAUGE SURF MAIN