Oceanic VT 3, Operating Manual

Page: 115 / 164

115
SURF ALT Display during the Transition Period (Fig. 98) -
• To access SURF ALT, press and release the A button (< 2
seconds) while viewing the NORM SURF MAIN display.
• Press the S button to activate the SmartGlo Backlight.
• Press and release the A button (< 2 seconds) while viewing
the NORM SURF ALT display to access the LOG Preview
screen for that dive.
• The screen will revert to NORM SURF MAIN after 5
seconds unless the A button is pressed.
To view that dive's LOG during the Transition Period -
• Press and release the A button 2 times (< 2 seconds each)
while viewing the NORM SURF MAIN display to access the
LOG Preview screen (Fig. 99).
• Press the S button to view the LOG 1 screen (Nitrogen/
Dive data).
• Press the S button again to view the LOG 2 screen (Oxygen
data), if a Nitrox dive.
• Press the S button again to return to the NORM SURF MAIN
screen.
• The screen will revert to NORM SURF MAIN after 2 minutes
if no button is pressed.
Data for that dive will not be stored in the VT3's memory until
the 10 minute Transition Period on the surface is completed.
Fig. 99 - LOG PREVIEW
(during Transition Period)
Fig. 98 - NORM SURF ALT