manualshive.com logo in svg

Oceanic VT 3, Operating Manual

Share
Download
Oceanic VT 3 Operating Manual Download Page 134

134

FREE DIVE Alarms are separate and unaffected by NORM/
GAUG Mode Alarm Settings, and the Alarms that occur in those
Modes are separate and unaffected by FREE DIVE Alarm Set-
tings.

FREE CDT (Count Down Timer) ALARM
When the FREE CDT decreases to 0:00 (min:sec), 3 short beeps
will sound 3 times, the red LED will flash, and the Message TIMR
will appear on the display 3 times momentarily (Fig. 118), then
revert to the Message FREE.

FREE DIVE DEPTH ALARM(S)
When Depth reaches the FREE DEPTH ALARM 1 Set Point, 3
short beeps will sound 3 times, the red LED will flash, and the
Message DPTH will appear on the display 3 times momentarily
(Fig. 119), then revert to the Message FREE.

The beeps and Message will be repeated when Depth reaches
the FREE DEPTH ALARM 2 and 3 Set Points, if set ON.

If Ascent is made above a FREE DEPTH ALARM Set Point and
then a descent is made to a Depth below it, the respective Depth
Alarm will sound again.

Fig. 119 - FREE DIVE MAIN

(During DEPTH ALARM)

Fig. 118 - FREE DIVE MAIN

(During CDT ALARM)

Summary of Contents for VT 3





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands