Oceanic versa Pro, Operating Manual

Page: 21 / 96

21
Backup Activation ( only if Water Activation is set ON)
As a backup, the Versa Pro will also automatically activate by
water contact. This is accomplished by bridging the gap
between contacts located on the Button stems and back of the
case. The graphic H2O that will be displayed as an indica-
tion is described later.
If no dive is made within 2 hours after initial activation, the
unit will automatically deactivate. If the wet contacts are still
bridged, the unit will reactivate and display the H2O graphic.
SURFACE MODE
Surface Mode (Fig. 16A), identified by the Surface Time icon,
follows Diagnostic Mode after Activation. Information includes
Dive Number '0' (no dive made yet), Temperature (and icon),
Time of Day (with icon), the Battery Consumption Indicator,
and Surface Time (with flashing colon).
If the wet contacts are bridged, the graphic 'H2O' will appear
in place of the dive number '0' (Fig. 16B). After the unit is
rinsed and dried, '0' will replace 'H2O'.
• Press the Advance (Front) button to access a sequence that
includes Plan, Fly, DeSaturate, and Log Modes.
• Press the Select (Side) button momentarily (less than 2
seconds) to activate the Backlight.
Fig. 16A- Surface Mode
Fig. 16B - Surface Mode
(rinse and dry the unit)