Oceanic versa Pro, Operating Manual

Page: 38 / 96

38
TO SET - USER SET DIGITAL GAUGE MODE
(while in the Surface Mode)
Factory set OFF, Digital Gauge Mode can also be set ON.
The effects of this feature being ON or OFF are described on
page 58.
• Press Both buttons simultaneously, release when SET: 2
appears.
• Press and release the Advance (Front) button, the Units
screen appears with the set point flashing.
• Press the Advance (Front) button 14 more times.
• The graphic GAU appears with OFF (or ON) flashing
(Fig. 38).
• Press and release the Select (Side) button to toggle be-
tween ON and OFF.
• Press the Advance (Front) button to accept the setting and
advance to Set Water Activation, or press and hold Both
buttons for 2 seconds to revert to Surface Mode.
Fig. 38 - Set Digital Gauge Mode
NOTE:
Once a dive is made
with this feature set
ON, the setting will be
locked ON for 24
hours after the dive.
Set Digital Gauge
Mode will not appear
as a selection during
that 24 hour period.