68
The tabs on the Retaining Ring fit down into the two slots
located at the 2 and 8 o'clock positions.
Using your fingers, turn the Ring counter clockwise 5 de-
grees until the tabs engage (Fig. 76), then tighten it 5 more
degrees by turning it counter clockwise using the Battery
Hatch Tool (Fig. 77).
While tightening the Retaining Ring, exert continuous inward
pressure on it until it is secured in the proper position. A
small symbol located on the Ring should be aligned with the
Locked symbol located on the Housing (Fig. 77a)
Inspection
Activate the unit and watch carefully as it performs a full
diagnostic and battery check, and enters Surface Mode.
Observe the LCD display to ensure it is consistently clear and
sharp in contrast throughout the screen.
WARNING: If there are any portions of the display
missing or appearing dim, or if a Low Battery condi-
tion is indicated, return your Veo 180Nx to an Autho-
rized Oceanic Dealer for a complete evaluation before
attempting to use it.
Fig. 77 -Tightening the
Retaining Ring
Fig. 76 -Engaging the
Retaining Ring Tabs
a
Summary of Contents for Veo 180Nx
Page 1: ...Veo 180Nx Personal Dive Computer Operating Manual...
Page 76: ...76 NOTES...
Page 77: ...77 NOTES...
