30
TO SET - FO2 50% DEFAULT
Factory set ON, the FO2 50% Default feature can be set to
OFF. The effects of this feature being ON or OFF are described
on page 17.
After having set and accepted the PO2 Alarm setting, the Set
FO2 50% Default screen appears with the Set Point flashing
(Fig. 27).
- - or - -
While the Surface Sequence is scrolling, press the button for
22 seconds.
Release the button when the Set FO2 50 screen appears
with the Set Point flashing.
Press and release the button (less than 2 seconds) to toggle
between ON and OFF.
Press the button for 2 seconds to accept the Set Point and
advance to Set Digital Gauge Mode.
Fig. 27 - Set FO2 Default
Summary of Contents for Veo 180Nx
Page 1: ...Veo 180Nx Personal Dive Computer Operating Manual...
Page 76: ...76 NOTES...
Page 77: ...77 NOTES...
