32
TO SET - WATER ACTIVATION
Factory set for On, the Water Activation feature can also be set
for OFF (disabled) to prevent inadvertent activation during travel
or storage. When set On, the Veo 180Nx will automatically
Activate and enter Dive Mode upon immersion in water.
After having set and accepted the Digital Gauge Mode
setting, the Set Water Activation screen appears with the Set
Point flashing (Fig. 29).
- - or - -
While the Surface Sequence is scrolling, press the button for
26 seconds.
Release the button when the Set Water Activation screen
appears with the Set Point flashing.
Press and release the button (less than 2 seconds) to toggle
between On and OFF.
Press the button for 2 seconds to accept the Set Point and
advance to Surface Mode.
Fig. 29 - Set Water Activation
WARNING: When the Water Activation feature is set
OFF, the Veo 180Nx must be manually activated or it
will not enter Dive Mode upon descent.
Summary of Contents for Veo 180Nx
Page 1: ...Veo 180Nx Personal Dive Computer Operating Manual...
Page 76: ...76 NOTES...
Page 77: ...77 NOTES...
