Oceanic Saunas 01902 450 550 [email protected]
7
4.2. Under Bench Heaters
i. Pilot drill and screw 2 x 30mm screws at
700mm centres approx 200- 300mm from
the floor, but most importantly 40mm to
the left off the centre of the wire hole.
ii. Hang the heaters onto the screws
iii. Fix underneath with 1x 30mm screw
central to the frameAudio Input (AUX)
4.3. Lighting
It is possible to connect up to 3No 12V spotlights to the lighting input on the control box. LED versions which are
suitable for Infrared saunas only are available to buy from Oceanic.
i. Assemble the spot light(s) as shown and fit into the ceiling hole(s).
ii. Install either standard or colour changing bulb(s) if supplied
iii. If you ordered the colour change lights come with a remote control to select the colour or colour
changing mode
iv. Finally Plug the pre wired light cable into the socket on the control box labelled “Light”
