background image

33

Programmable, Submersible Live Vest User Manual  copyright Oceanic Safety Systems LLC., 2014

Limited Lifetime Warranty Limitations and Exclusions: The Warranty Is Subject to the Following
Limitations and Exclusions:
1. Limited 5-year Warranty (Excludes Batteries and the Vest Soft Parts)

Your PSLV must be used in accordance with the VUser Manual. The Warranty does not apply to defects
or damage caused by: (i) misuse, neglect or improper or rough handling (including punctures, bending,
compressing or dropping of the PSLV ); (ii) any use of the PSLV not in accordance with the PSLV User
Manual; (iii) using the PSLV with or connecting the PSLV to any product, accessory software and/or
service not manufactured, supplied or approved by OSS ; (iv) normal wear and tear; or (v) accidents, fire,
power changes, other hazards, acts of God and other causes beyond the reasonable control of OSS .
Cosmetic damage(s), such as scratches, nicks and fraying are not covered under warranty except when
the product is new, out of the original packaging. The Warranty will be void if: (i) the PSLV has been
opened, modified or repaired by any person other than OSS ; (ii) the PSLV’s serial numbers have been
removed, erased, defaced or altered in any way or is illegible, as determined by OSS in its sole
discretion; or (iii) the PSLV has been exposed to chemical products, including, but not limited to, solvents
and insect repellants; (iv) This product has been used in excess of  100 meters (328 feet) or in unmanned
submersions including, but not limited to, submersions in an unmanned vehicle or on a rope, (v)
damaged by accidents, fire, power changes, other hazards, acts of God and other causes beyond the
reasonable control of OSS. Only the actuator and the vest have been designed for underwater use. Never
submerge with the charger connected to the PSLV . Doing so will damage the accessories and/or the
PSLV , and will also void the Warranty.
 Warranty coverage on your PSLV covers the product for 5 years subject to the conditions listed above
and utilizes a prorated replacement policy below.  OSS warrants to the purchaser for 5 years, from the
date of shipping, that the product will be free from defects in materials and workmanship, provided that it
is subjected to normal use, proper care and prescribed service subject to the limitations listed above.
Some components may be replaced with another component with a different serial number. The
replacement component will be either completely remanufactured and tested like new, or at our option,
we will make the replacement with new components.

1 a.  PSLV Components Replacement on a Pro-Rated Basis

PSLV products that malfunction due to material or manufacturing defects will be replaced by OSS. In
fulfillment of the Warranty, OSS may, at its sole discretion, use parts that are new, equivalent to new or
reconditioned, or may provide a new, equivalent to new or reconditioned PSLV in replacement of the
PSLV you have returned.

1 b. PSLV Lithium Ion Battery Warranty Limitations and Exclusions

 

2-year limited Warranty

The Lithium Ion Battery Warranty is subject to the following limitations and exclusions:

            (i) The Battery Warranty does not apply if the PSLV is recharged while in direct sunlight or while
exposed to temperatures in excess of 45°C (113°F) or while  using a charger other than the charger
supplied with the product.
             (ii) The Battery Warranty does not apply to battery failure caused by: (a) misuse, neglect or
improper or rough handling (including punctures, bending, compressing or dropping of the PSLV ); (b)
any use of the PSLV not in accordance with the PSLV User Manual; (c) use of the PSLV with or
connection of the PSLV to any product, accessory, software and/or service not manufactured, supplied or
approved by OSS; (d) accidents, fire, power changes, other hazards, acts of God and other causes
beyond the reasonable control of OSS.

Summary of Contents for PROGRAMMABLE SUBMERSIBLE LIFE VEST






































Reviews:

Related manuals for PROGRAMMABLE SUBMERSIBLE LIFE VEST