background image

22

Programmable, Submersible Live Vest User Manual  copyright Oceanic Safety Systems LLC., 2014

I.  USER AGREEMENT AND WARRANTY FOR THE PROGRAMMABLE, SUBMERSIBLE LIFE
VEST (PSLV)   

The PSLV is designed to deliver the operator, who exceeds self-set parameters, to the surface in a
face-up position where recovery and rescue attempts may be possible. There is no guarantee that the
operator will be able to surface, with or without the PSLV . There could be obstructions in the path
(e.g., overhead seaweed, other operators, or boats) that could prevent surfacing. The PSLV is only
intended to inflate when the user’s parameters are exceeded. There is no guarantee of survival.

A. You Assume Risks and Responsibilities

Military type activities are inherently dangerous and risky. Even with the best training, planning, and
equipment, you may be injured or you may die. If you choose to participate in military-type activities,
you accept the risk of injury or death on behalf of yourself, your heirs, beneficiaries, trustees,
successors, assigns, partners and executors. It is your responsibility to take all necessary steps to
reduce these risks. Therefore, it is your sole responsibility to obtain appropriate training, to conduct
appropriate operational tests, obtain maintenance, to check your appropriate equipment, to operate
only within your abilities and experience, and to always conduct activities with a capable support team.

B. IMPORTANT NOTICE

THIS OCEANIC SAFETY SYSTEMS LLC (OSS) PSLV USER AGREEMENT AND WARRANTY

(“AGREEMENT”) IS AN AGREEMENT BETWEEN YOU AND OSS. YOUR USE OF THE PSLV IS
SUBJECT TO THE TERMS AND CONDITIONS SET OUT IN THIS AGREEMENT. THIS
AGREEMENT ALSO SETS OUT OSS ’S WARRANTY OF THE PSLV, EXCLUSIONS AND
LIMITATIONS OF OSS ’S LIABILITY TO YOU, AND OTHER IMPORTANT PROVISIONS.

IF YOU DO NOT AGREE WITH ANY TERM OF THIS AGREEMENT, YOU MUST NOT USE PSLV
. YOU MUST READ THE ENTIRE PSLV USER MANUAL INCORRECT USE OF THE PSLV OR ITS
ACCESSORIES WILL INVALIDATE THIS WARRANTY AND CAN CAUSE PERMANENT DAMAGE
TO THE PSLV AND/OR ITS ACCESSORIES AND CAN CAUSE YOU SERIOUS INJURY OR
DEATH.  THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE AND COUNTRY.

C. Initial Return Policy

You may return the unused PSLV within 30 days after the date you receive the PSLV for a complete
refund less shipping and handling. Before you use the PSLV, you agree to thoroughly read and
understand the User Agreement, the Warranty, and the User Manual. When you use the PSLV , you
have agreed to the User Agreement and Warranty. Once used, the PSLV may not be returned.

D. Warranty Information
           

   NOTE

: The original purchaser is automatically registered. If you are not the original

purchaser, please consult the OSS  website: www.oceanicss.com  for contact information to validate
your warranty and to update warranty registration information within 15 days of transfer.  All warranty
transactions must be accompanied by proof of original purchase. Be sure to save your sales receipt
and present it whenever you return your PSLV for warranty service or when selling your PSLV to
another person. The receipt contains the PSLV’s serial number.

Summary of Contents for PROGRAMMABLE SUBMERSIBLE LIFE VEST






































Reviews:

Related manuals for PROGRAMMABLE SUBMERSIBLE LIFE VEST