OCEANAIRE 2OACH Series, Engineering, Installation And Service Manual

Page: 19 / 36

17
OCEANAIRE DELUXE ELECTRONIC CONTROLLER
When power is connected, the controller will display “888” momentarily, and will then
disappear. Press the POWER button, then press the TEMP SELECT button until the
SET POINT is displayed. Adjust the SET POINT to the desired temperature, and the
unit will heat/cool as programmed.
The systems controls temperature /- 2°
POWER
- Turns the unit on/off when power is supplied
MODE
- Select the mode of operation from
AUTO...COOL….HEAT….MOISTURE CONTROL .
AUTO
- The controller will heat or cool as required. HEAT or COOL will display
accordingly. A 4° differential is needed to change between cooling and heating modes.
COOL
- The system will operate in cooling mode, only .
HEAT
- The system will operate in heating mode, only.
MOISTURE CONTROL
- The system operates in the cooling mode to reduce
humidity within the conditioned space. Every 4 hours, the fan is started, circulating
the air, and the air temperature is recorded by the controller. The cooling cycle is
started for one hour, or until the room temperature drops 2°, which ever comes first.
This cycle repeats every four hours.
DELUXE ELECTRONIC CONTROLLER
The 2OACH controller is equipped with many features for a more precise level of
comfort and operation. Additionally, the controller can be removed from the unit
and installed for remote operation, if needed (accessory parts may be required).
POWER
button