13
Step 5
:
Selector position 5 will be “ rapid 15' ”
So machine will make exactly the same algorithm of rapid 15'.
So, time for selector position 5 is 12 minutes.
During rapid 15 program if eps detects high water level, overflow algorithm is applied and e04 is released.
Step 6
:
Selector position 6 will be “drying 5” step.
Machine will make below algorithm;
So, time for selector position 6 is 5 minutes.
At the end of drying 5, “end” is visualized and door is unlocked. During test pressing other buttons makes no change.
During service mode if any failure is detected error code is shown in 7 segement display.
At the end of drying the door will be unlocked and machine will go to end mode.
7-segment display 1, 2, 3 :
