Ocean Matrix OMX-SW5x5, Instruction Manual

Page: 8 / 30

Your OMX-SW5x5 Video Audio Matrix Switcher
5
Table 2: Rear Panel OMX-SW5x5 5x5 Video Audio Matrix Switcher Features
# Feature Function
1 LOOP BNC Connector For looping the inputs
2 EXT. SYNC BNC
Connector
Connects to the external SYNC source
3 Composite BNC OUT
Connectors
Connects to the composite video acceptors (from 1 to 5)
4
V
ID
E
O
Composite BNC IN
Connectors
Connects to the composite video sources (from 1 to 5)
5 INPUTS Terminal Block
Connectors
Connect to the balanced stereo audio sources (from 1 to 5)
6
A
U
D
IO
OUTPUTS Terminal
Block Connectors
Connect to the balanced stereo audio acceptors (from 1 to 5)
7 RS-232 DB 9F Port Connects to the PC or the Remote Controller
8 RS-485 Terminal Block Port Pin G is for Ground connection; Pins B (-) and A (+) are for RS 485
9 FLASH PROG Button Reserved
1
10 Dipswitches Dipswitches for setup of the unit (1, 2, 3 and 4 are for setting the
machine #; 5 is for the Vertical Interval Source; 8 is for RS-485
Termination)
11 Power Connector with Fuse AC connector enabling power supply to the unit
1 For use by technical support personnel to upgrade to the latest firmware. On some versions you will find an additional reset
button located on the underside of the unit, this too is reserved for technical support personnel