Ocean Matrix OMX-SW5x5, Instruction Manual

Page: 7 / 30

Your OMX-SW5x5 Video Audio Matrix Switcher
4
Table 1: Front Panel OMX-SW5x5 5x5 Video Audio Matrix Switcher Features
# Feature Function
1 IR Receiver The red LED is illuminated when receiving signals from the Infra-red remote
control transmitter
2 Power Switch Illuminated switch for turning the unit ON or OFF
3 OUT Buttons Select the output to which the input is switched
4 IN Buttons Select the input to switch to the output
5 ALL Button Pressing ALL followed by an INPUT button, connects that input to all outputs
1
6 OFF Button An OFF - OUT combination disconnects that output from the inputs; an
OFF - ALL combination disconnects all the outputs
7 7-segment Display Displays the selected audio
2
or video
3
input switched to the output (marked
above each input)
4
8 VIDEO Button When pressed
5
actions relate to video
9 AFV Button When pressed
6
actions relate to video and audio channels. Audio channels
follow the video channels
10 AUDIO Button When pressed
7
actions relate to audio
11 STO (STORE) Button Pressing STO followed by an output button stores the current setting
8
12 RCL ( RECALL )
Button
Pressing the RCL button and the corresponding OUTPUT key recalls a
setup from the non-volatile memory. The stored status blinks. Pressing a
different OUTPUT button lets you view
9
another setup. After making your
choice, pressing the RCL button again implements the new status
13 TAKE Button Pressing TAKE toggles the mode between the CONFIRM mode
10
and the
AT ONCE mode (user confirmation per action is unnecessary)
14 LOCK Button Disengages the front panel switches
1 For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
2 When the Audio button illuminates, that is, when the audio breakaway mode is selected
3 When the Video button illuminates, that is, when the video breakaway mode is selected
4 Also displays the number of IN and OUT ports, the firmware version number, and the MACHINE #. Refer to section 8.1
5 The VIDEO button is illuminated when the video breakaway mode is selected
6 The AFV button is illuminated when the AFV mode is selected
7 The AUDIO button is illuminated when the audio breakaway mode is selected
8 For example, press STO and then the Output button # 3 to store in Setup # 3
9 Only view, nothing is implemented at this stage
10 When in Confirm mode, the TAKE button illuminates