OPERATING INSTRUCTIONS
Press the ION button, to activate the ion
generator which will help to remove
pollen and impur ities from the air, and
trap them in the filter. Press again to stop.
8
ION button(optional)
Operating Instructions
- Press the "MODE" button until the "COOL"
indicator light comes on.
- Press the UP or DOWN arrow buttons " " or " "
to select your desired room temperature. The
to select your desired room temperature. The
temperature can be set within a range of
O
O
O
O
17 C-30 C/62 F-88 F.
- Press the "FAN SPEED" button to change
change
the
fan speed.
UP or DOWN arrow buttons " " or " "
- Press the "MODE" button until the "DRY" indicator
light comes on.
- In this mode, you cannot change the fan speed or
adjust the temperature. The fan motor operates at
LOW speed.
- Keep windows and doors closed for the best
dehumidifying effect.
- Do not put the duct to window.
COOL mode
DRY mode
- Press the "MODE" button until the
"FAN " indicator light comes on.
- Press the "FAN SPEED" button to
choose the fan speed. The temperature
c
settings annot be adjusted.
- Do not put the duct to window.
FAN mode
TIMER mode
- Press the "MODE" button until the "HEAT"
indicator light comes on.
- Press the
temperature can be set within a range of
O
O
O
O
17 C-30 C/62 F-88 F.
- Press the "FAN SPEED" button to
the
fan speed. For some models, the fan speed
can not be adjusted under HEAT mode.
HEAT mode
(not available on cooling only models)
AUTO mode
- When you set the air conditioner in AUTO
mode, it will automatically select cooling,
heating(only on cooling only models), or fan
only operation depending on the temperature
you have selected and the current room temperature.
- While the unit is on, press the
Timer button, the TIMER OFF
indicator light illuminates. This indi-
cates the Auto Stop program is
initiated.
-
- Press or hold the UP or DOWN
button to change the Auto time by
h
half an our increments, up to 10
hours,
then at 1 hour increments up
to 24
hours. The control will count
down
the time remaining until start.
- The selected time will register in 5
second and the system will autom-
atically revert back to display the
previous temperature setting.
- Turning the unit ON or OFF at any
time or adjusting the timer setting
to 0.0 will cancel the Auto Start/
Stop program.
- If a malfunction (E1 or E2)
occurs,
the Auto Start/Stop program will
also be cancelled.
While the unit is off, first press the
Timer button, the TIMER ON indic-
ator light illuminates. This indicates
the Auto Start program is initiated.
SLEEP mode
- The air conditioner will
control room
temperature
automatically
around the
temperature point
set
you
.
- In AUTO mode, fan speed cannot be
changed.
Press to change the louver angle. Press and
hold the button to initiate the Auto-Swing feature.
9
SWING button
(Applicable to the models with auto swing feature only)
In SLEEP mode, the selected temperature
will increase(cooling) or decrease(heating)
by one degree every 30 minutes.The
temperature will increase(cooling) or
decrease (heating) by another one degree
a
for n additional 30 minutes. This new
temperature will be maintained for 7 hours
before it returns to the originally selected
temperature. This ends the Sleep mode
and the unit will continue to operate as
originally programmed.
NOTE:
This feature is unavail l
ab e in
FAN or DRY mode.
* Self Evaporation System works
in COOL mode only
6
Summary of Contents for OBZ-08PE
Page 18: ......
